431659 Johnson Evinrude 1979-98 Rebuildable Cylinder Block 85 88 90 100 110 + HP

• This powerhead was removed from a 1995 90 HP Evinrude engine.
• There is some scoring on one cylinder.
• Compression readings are as follows: Cylinder 1. 110 PSI Cyliinder 2. 110 PSI Cylinder 3. 105 PSI Cylinder 4. 95 PSI.
  
• The cylinders are bored standard so this has not been oversized. 
• It is a flat back exhaust, meaning that these were mostly used on 88-110 HP models but if the flat back is changed to a bubble back, this is shown as the same block for the 115-140 hp models with increased exhaust.  
  
  Obviously, this is an empty block but it is ready for use on your project.
  

We offer a 45-day return policy so you can purchase this item with confidence. If you have any issues with the product, please reach out to us and we would be happy to help resolve any issue that may occur. Please be absolutely sure this is the correct one for your motor prior to purchasing.

If you purchase this item incorrectly or change your mind, we will accept a return within 45 days however, we will charge our initial shipping cost and a 20% restocking fee. If you have any questions, please contact us.

Location: Southcentral Outboards, Altamont, Illinois

We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help!