Paint has been stripped and primed, so you can easily repaint to your desired color
From the top of the water pump to the end, the driveshaft measures approximately 19" long and has a 14/13 spline count.
Driveshaft splines show very light wear
Skeg has been straightened, it is a little rough on the bottom edge but this will not effect performance
Oil was a little dirty but showed no signs of heavy metal
This unit will need to be resealed as it has a leak around the water pump base
Needs intake screens
General Information
Freshwater condition
No metal in oil
Shafts checked for straightness
Shifts and spins smoothly with no binding
Will need to add oil before use
**Due to shipping restrictions, lower unit are shipped empty. Every lower unit requires new oil to be installed when you receive it.
If you order this incorrectly or change your mind within 45 days, you may return it with a 20% restocking fee and shipping. You must contact us in order tofacilitate that. You cannot open a return on ebay in this case.
2003 & UP - 40 & 50 HP We have provided this cross-reference with the resources we have available in regards to fitment. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us or a dealer prior to purchasing and we would be happy to help!
