Mercury Lower Unit 1976-1988 135 150 175 200 HP 20" L 1.87 to 1 Gear Ratio

$475.00

Details

Item Description	Mercury Lower Unit
Part Number	N/A
Condition	This is a used lower unit in good condition. The paint has some wear around the skeg and some scratches in areas but will not hurt the overall performance. The skeg has a small chip in it (as shown in picture). There is a crack on the top of the cavitation plate. This has been pressure tested and is in need of a new shift rod reseal. This is a 20" long and will only fit years from 1976-1988, it does have the preload pin. This has a gear ratio of 1.87 to 1.
Additional Info	All lower units are tested in-house. We perform a pressure-test and we ensure that it is working in forward, reverse, and neutral. Generally speaking, lower units are mechanical, so testing is simple enough. The only thing that is not checked on lower units is the condition of the impeller. We advise changing impellers anytime you replace a lower unit. If you call in your order, we can give you a price and time frame for a new impeller and we will install a new impeller for you at cost. This is a service to you and we are happy to provide it for no additional labor charge. Due to shipping restrictions, lower unit are shipped empty. Every lower unit requires new oil to be installed upon receipt. We will be happy to provide assistance with this if you have not done it before.
Fits:	1976-1988 135 150 175 200 HP
Our Inventory #	20701