Mercury 2013 & UP 20" TorqueMaster II Lower Unit 225 250+ HP 3.0L V6 1 YR WTY

This unit shifts and spins smoothly with no binding. The gears and clutch are in good condition with the slightest bit of wear. The prop shaft is straight, and the driveshaft splines are in good condition with slight wear. The paint has been stripped off and a coat of primer applied. This unit has been fully resealed, and pressure checked with a new impeller installed. The driveshaft measures 21 1/4" from the top of the water pump to the end of the shaft.  There are 13 splines on it and 19 on the prop shaft.  

Please remember that we drain this unit of all oil prior to shipping and you will need to refill it prior to use. 

General Information

• Freshwater condition
• Professionally Cleaned
  
• Pressure checked to 12 PSI minimum
  
• Shafts checked for straightness
  
• 1 year mechanical warranty

To obtain the 1 year warranty, you MUST send in your core lower unit. We will even pay to have your core shipped to us! Below is the criteria required to validate the warranty:

• Core must be of rebuildable quality
• Cannot be locked up - driveshaft must spin
• Up to 30 days from the date of purchase to send in your core
• Covers mechanical aspects ONLY
• Warranty begins from date of purchase
• Core must be complete and cannot be missing parts

Upon receipt of your core, we will inspect the unit to determine if it meets the criteria to validate the 1 year warranty. When you receive your purchased lower unit, there will be installation paperwork included in the package. One copy of the paperwork must be signed returned with your core. If it does not, you will be contacted and granted a 30 day warranty. We reserve the right to accept or reject any core at our discretion.

Please note that we will not accept returns for this item. Please be absolutely sure this is the correct one for your motor prior to purchasing.

Location: Southcentral Outboards, Altamont, Illinois

We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help!