Mercruiser Alpha I Gen I 1984-1990 Outdrive Lower Unit 1.62:1 6 MONTH WTY

This Mercuiser lower unit is in good condition, gear ratio 1.62:1. From the top of the water pump, the driveshaft measures approximately 7-1/4" long and has 13 splines. Please note that this lower unit does not come with the trim tab. There are some cosmetic flaws in the paint on the lower unit, but this will not affect the overall performance of this unit. This is ready to install. 

General Information

• Freshwater condition
• Pressure checked to 12 PSI minimum
• New impeller 
• Shafts checked for straightness
• Clean Housing
• Shifts in and out of gear smoothly

To obtain the 6 month warranty, you MUST send in your core lower unit. We will even pay to have your core shipped to us! Below is the criteria required to validate the warranty:

• Core must be of rebuildable quality
• Cannot be locked up - driveshaft must spin
• Up to 30 days from the date of purchase to send in your core
• Covers mechanical aspects ONLY
• Warranty begins from date of purchase
• Core must be complete and cannot be missing parts

You will receive two copies of the terms and conditions for the lower unit 6 month warranty. One copy MUST be signed and returned with your core. Without a returned signed copy, the 6 month warranty will not be valid. 

Upon receipt of your core, we will inspect the unit to determine if it meets the criteria to validate the 6 month warranty. We reserve the right to accept or reject any core at our discretion.

Location: Southcentral Outboards, Altamont, Illinois

We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help!