Mercruiser 1969-1983 Pre Alpha Lower Unit 6 MONTH WARRANTY

• 6 Month Warranty
• New Impeller
• Pressure Checked

• This Mercruiser lower unit was removed from a freshwater engine and is in good condition.
• From the top of the water pump to the end, the driveshaft measures approximately 8-3/8" long and has 13 splines on the end. The propeller shaft has 15 splines.
• All the spines are in good condition and are not cracked or chipped.
• Unit shifts and spins smoothly with no binding and the prop shaft is straight
  
• The skeg is broken - please refer to photos
• Please note this does not come with the trim tab.
• The paint is scuffed and scratched throughout, but this is entirely cosmetic.
• The oil was free of heavy metal and water
• As seen in the pictures, the unit does have pre-drilled holes in the cavitation for a planing fin.
• All oil is drained prior to shipping.  Please add oil before installation. 
• Please refer to the photos to verify what is included in this listing and the condition this unit is in prior to ordering
• Given our unprecedented 1 year warranty on every lower unit, you will never find a better deal on an OEM lower unit.  Purchase with confidence!   

General Information

• Freshwater condition
• Opened & Inspected
• Professionally Cleaned
• New Impeller
• Pressure checked to 12 PSI minimum
• Shafts checked for straightness
• 6 month mechanical warranty

You will receive two copies of the terms and conditions for the lower unit 6 month warranty. One copy MUST be signed and returned. Without a returned signed copy, the 6 month warranty will not be valid. 

We offer a 45-day return policy so you can purchase this item with confidence. If you have any issues with the product, please reach out to us and we would be happy to help resolve any issue that may occur. Please be absolutely sure this is the correct one for your motor prior to purchasing.

If you purchase this item incorrectly or change your mind, we will accept a return within 45 days however, we will charge our initial shipping cost and a 20% restocking fee. If you have any questions, please contact us.

Location: Southcentral Outboards, Altamont, Illinois

We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help!