Johnson Evinrude Lower Unit Ficht Standard Rot. 1992 and newer V6

This lower unit was removed from a freshwater engine. The cavitation plate and skeg are in good condition but do have some nics on the edges as any used part would. The paint is in overall good condition but has some minor pitting around the back of the bullet but nothing that would affect the ability for this unit to be used properly. 

The driveshaft measures 19 3/4" from the top of the waterpump up. The spline count is 20 on the driveshaft and 15 on the prop shaft.  

This lower unit will fit Johnson and Evinrude 1992 and newer standard rotation motors.  The driveshaft is a 2 piece driveshaft.   If you are unsure of the year of your motor, please feel free to contact us.

This unit was drained and pressure tested and is free of any metal or water in the gear housing and has no leaks. The unit was also tested to make sure it was shifting in and out of gear properly and it is.  We do advise changing the impeller.  We can do this for you at the cost of the impeller, no labor charges, if you contact us before you purchase.  If you have any questions please feel free to contact us!

Contact Information

Every part we sell is available locally, on our website, and on ebay. For help with cross-referencing or other payment options, please call (618) 487-9499. Our hours change with the time of the year, but current hours should be on the phone message.

Shipping & Handling

We are dedicated to getting parts out within 1 business day in every possible case. This is still a business so if we run a day behind, please bear with us. There's usually a lot going on. Shipping prices are for the lower 48 states. If you are international or yourlocation is not listed, please contact us with your postal code and we will obtain a quote for you.