Johnson Evinrude Lower Unit 1968-1970 33 HP 20" Driveshaft

• Spins but does not shift, missing shift pin
• Splines have wear
• Some chips out of the cavitation and skeg. 

• This lower unit came in loose to us.  
• We are unsure of which model it came from exactly. 
• Unit did not pressure check due to missing shift pin. and a full reseal is recommended due to age.   
• We do recommend changing the impeller before installation.   
• It is a freshwater unit.
• Unit spins and does not shift as it is missing the shift pin. 
• Driveshaft splines have heavy wear. 
• Propeller shaft is straight. 
• The paint has seen better days and is purely cosmetic. 
• The cavitation plate is broken and the case extension is beat up as well.
• There are some chips out of the skeg plate.

• The driveshaft measures 20 7/8" from the top of the waterpump housing.  The spline count is 14.
• This is a pin drive on the prop shaft.
• Please refer to the photos to verify exact content of this listing and to insure that you are ordering the correct part for your boating needs.

Please note that we will not accept returns for this item. Please be absolutely sure this is the correct one for your motor prior to purchasing.

Location: Southcentral Outboards, Altamont, Illinois

We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help!