Johnson Evinrude 1992 & UP Lower Unit 150 175 200 225 HP V6 6 MONTH WTY

This lower unit was removed from freshwater engine. We have taken the time to professionally clean and inspect this lower unit. This unit has a 25" shaft installed, its a 2 piece driveshaft so it may not match yours but they take 10 minutes to change and we can provide instructions to do so. We have installed a new impeller. This has been pressure tested to 12 psi. The splines on both the driveshaft and the propeller shaft are in excellent condition. There are holes in the cavitation plate where previous owner drilled for the planning fin. This lower unit does not come with the propeller or the propeller hardware. The intake screens are also in great condition. The paint has seen better days, please see pictures!. The skeg was ground down a little so we have installed a brand new skeg gard. Please remember to add oil before use. Purchase with confidence!   

Driveshaft measures approximatly  - 23 1/4" from top of water pump housing to top of driveshaft.
Driveshaft spline count - 20
Prop shaft spline count - 15

General Information

• Freshwater condition
• New Impeller
• Pressure checked to 12 PSI minimum
• Shafts checked for straightness

Criteria to validate your 6 month warranty:

• Core must be of equal or greater value
• Cannot be locked up - driveshaft must spin
• Up to 30 days from the date of purchase to send in your core
• Covers mechanical aspects ONLY
• Warranty begins from date of purchase

You will receive two copies of the terms and conditions for the lower unit 6 month warranty. One copy MUST be signed and returned with your core. Without a returned signed copy, the 6 month warranty will not be valid. 

Upon receipt of your core, we will inspect the unit to determine if it meets the criteria to validate the 6 month warranty. We reserve the right to accept or reject any core at our discretion. If you have any questions or concerns, please do not hesitate to contact us and we would be happy to help!

Location: Southcentral Outboards, Altamont, Illinois

We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help!