Johnson Evinrude 1989-01 20" Lower Unit 60 70 HP 3 Cyl 2-Stroke 1 YR WARRANTY

• New Impeller
• Pressure checked to 12 PSI minimum
• Fully Resealed
• Shafts checked for straightness
• 1 year warranty in exchange of spinning core

• Unit shifts and spins smoothly without binding with a straight propeller shaft
• Paint is a little banged up with holes pre-drilled on the cavitation plate in preparation for a planing fin
• The gears and clutch are in good condition
• Unit has been fully resealed and pressure checked with a new impeller installed
• 1 year warranty with valid core 
• Please refer to the photos to verify what is included in this listing and the condition these parts are in prior to ordering
• Purchase with confidence!
  
  
  This unit has been drained of all oil prior to shipping.  Please add oil before use

Measures approximately 19" from top of water pump to top of drive shaft.
Driveshaft spline count - 17
Prop shaft spline count - 13

General Information

• Removed from a freshwater engine
• Professionally inspected and cleaned
• Scuffs and chips in the paint
• New Impeller
• Pressure checked to 12 PSI minimum
• Fully Resealed
• Shafts checked for straightness
• Does not come with trim tab, propeller, or propeller hardware

Criteria to validate your 1 year warranty:

• Core must be of equal or greater value
• Cannot be locked up - driveshaft must spin
• Up to 30 days from the date of purchase to send in your core
• Covers mechanical aspects ONLY
• Warranty begins from date of purchase

You will receive two copies of the terms and conditions for the lower unit one year warranty. One copy MUST be signed and returned with your core. Without a returned signed copy, the one year warranty will not be valid. 

Upon receipt of your core, we will inspect the unit to determine if it meets the criteria to validate the 1 year warranty. We reserve the right to accept or reject any core at our discretion. If you have any questions or concerns, please do not hesitate to contact us and we would be happy to help!

We offer a 30 day return policy on all of our products so you can purchase them with confidence. If you have any issues with the product, please reach out to us and we would be happy to help resolve any issue that may occur. Please be absolutely sure this is the correct one for your motor prior to purchasing.

 Location: Southcentral Outboards, Altamont, Illinois

We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help!