Johnson Evinrude 1989-1992 20" Lower Unit 40 48 50 HP 2 Cyl 1 YEAR WARRANTY

This lower unit is in great condition. We have professionally inspected the unit to guarantee it to be in great, working condition.  It has been fully resealed with a new impeller. The gears and clutch are in good condition with light wear on the clutch and on clutch surfaces on gears. Driveshaft splines do have some slight wear. The unit shifts and spins smoothly. The paint has some minor scuffs and scratches, but nothing that will affect overall performance or integrity.  The intake screens are in great shape. This does not come with the trim tab. The tip of the skeg has been ground down. There also were holes drilled in the cavitation plate for a planing fin. This listing comes with a 1 year warranty so purchase with confidence that you are getting the best deal on this lower unit for your boating needs!

Please add oil before installation.   

Driveshaft measures - 19-1/2" from top of water pump housing to top of driveshaft.
Driveshaft spline count - 14
Prop shaft spline count - 13

General Information

• Removed from a freshwater condition
• Pressure checked to 12 PSI minimum
• New impeller
• Fully Resealed
• Shafts checked for straightness
• Skeg trimmed down 
• Holes in cavitation plate from planing fin. 

Criteria to validate your 1 year warranty:

• Core must be of equal or greater value
• Cannot be locked up - driveshaft must spin
• Up to 30 days from the date of purchase to send in your core
• Covers mechanical aspects ONLY
• Warranty begins from date of purchase

You will receive two copies of the terms and conditions for the lower unit one year warranty. One copy MUST be signed and returned with your core. Without a returned signed copy, the one year warranty will not be valid. 

Upon receipt of your core, we will inspect the unit to determine if it meets the criteria to validate the 1 year warranty. We reserve the right to accept or reject any core at our discretion. If you have any questions or concerns, please do not hesitate to contact us and we would be happy to help!

Please note that we will not accept returns for this item if ordered incorrectly. Please be absolutely sure this is the correct one for your motor prior to purchasing.

We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help!