Johnson Evinrude 1989-01 20" Lower Unit 60 70 HP 1 YEAR WARRANTY Fresh Primer

• Unit shifts and spins smoothly without binding
• Prop shaft is straight
• NEW GEARS INSTALLED - SEE INSTRUCTIONS BELOW
• Please see pictures for further condition and what all is included in this listing.
• All oil is drained prior to shipping - Please add oil before use

Measures approximately 19" from top of water pump to top of drive shaft.
Driveshaft spline count - 17
Prop shaft spline count - 13

General Information

• Removed from a freshwater engine
• Professionally inspected and cleaned
• Freshly primered paint
• New Impeller
• Pressure checked to 12 PSI minimum
• Fully Resealed
• Shafts checked for straightness
• Does not come with trim tab, propeller, or propeller hardware
• INSTRUCTIONS FOR 10 HOUR BREAK-IN PERIOD:

1.  Avoid full throttle starts
2. DO NOT operate at constant speeds for extended periods
3. DO NOT exceed 75% of full throttle during the first 5 hours of operation.  During the next 5 hours, full throttle operation is permissible for brief periods
4. Shift into forward gear a minimum of 10 times during break-in, with moderate engine speed after each shift

Criteria to validate your 1 year warranty:

You will receive two copies of the terms and conditions for the lower unit one year warranty. One copy MUST be signed and returned with your core. Without a returned signed copy, the one year warranty will not be valid. 

Upon receipt of your core, we will inspect the unit to determine if it meets the criteria to validate the 1 year warranty. We reserve the right to accept or reject any core at our discretion. If you have any questions or concerns, please do not hesitate to contact us and we would be happy to help!

We offer a 30 day return policy on this product so you can purchase it with confidence. If you have any issues with the product, please reach out to us and we would be happy to help resolve any issue that may occur. Please be absolutely sure this is the correct one for your motor prior to purchasing.

Location: Southcentral Outboards, Altamont, Illinois

We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help!