Johnson Evinrude 1978-91 Lower Unit 25" Springer 85 88 90 100+HP 1 YEAR WTY

• 1 YEAR WARRANTY
• FULLY RESEALED
• PRESSURE CHECKED WITH NEW IMPELLER

• This springer lower unit is in great condition and is ready for installation. All you have to do is add oil!
• We took the time to professionally clean and inspect this item to give you confidence in your purchase.
• From the top of the water pump to the end, the driveshaft measures approximately 23 5/8" long and has a 20/15 spline count.
• All of the splines are in great shape and the unit shifts and spins smoothly with no binding.
• There is some slight skeg gaurd damage - this should not affect performance
• Gears and clutch are in good condition
• This unit has been fully resealed, pressure checked, and a new impeller installed

General Information

• Freshwater condition
• Holds pressure to 12 PSI
• New Impeller
• Shafts checked for straightness
• Shifts and spins smoothly
• Will need to add oil before use

**Due to shipping restrictions, lower unit are shipped empty. Every lower unit requires new oil to be installed when you receive it.

To obtain the 1 year warranty, you MUST send in your core lower unit. We will even pay to have your core shipped to us! Below is the criteria required to validate the warranty:

• Core must be of rebuildable quality
• Cannot be locked up - driveshaft must spin
• Up to 30 days from the date of purchase to send in your core
• Covers mechanical aspects ONLY
• Warranty begins from date of purchase
• Core must be complete and cannot be missing parts

You will receive two copies of the terms and conditions for the lower unit 1 year warranty. One copy MUST be signed and returned with your core. Without a returned signed copy, the 1 year warranty will not be valid. 

Upon receipt of your core, we will inspect the unit to determine if it meets the criteria to validate the 1 year warranty. We reserve the right to accept or reject any core at our discretion.

We offer a 45-day return policy so you can purchase this item with confidence. If you have any issues with the product, please reach out to us and we would be happy to help resolve any issue that may occur. Please be absolutely sure this is the correct one for your motor prior to purchasing.

If you purchase this item incorrectly or change your mind, we will accept a return within 45 days however, we will charge our initial shipping cost and a 20% restocking fee. If you have any questions, please contact us.

Location: Southcentral Outboards, Altamont, Illinois

We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help!