Johnson Evinrude 1978-91 20" Lower Unit 85 88 90 100 110 115 + HP V4 1 YEAR WTY

• Primed and ready for paint
• New impeller and fully resealed
• 1 year warranty in exchange for your core

• Opened & Inspected
• Paint stripped and primed, ready for paint
• Shifts and spins smoothly
• Professionally Cleaned
• New Impeller
• Pressure checked to 12 PSI minimum
• Fully Resealed
• Shafts checked for straightness
• Oil was dirty, but free of heavy metal
• Driveshaft splines do show slight wear
• 1 year mechanical warranty

• Core must be of equal or greater value
• Cannot be locked up - driveshaft must spin
• Up to 30 days from the date of purchase to send in your core
• Covers mechanical aspects ONLY
• Warranty begins from date of purchase

You will receive two copies of the terms and conditions for the lower unit 1 year warranty. One copy MUST be signed and returned with your core. Without a returned signed copy, the one year warranty will not be valid. 

Upon receipt of your core, we will inspect the unit to determine if it meets the criteria to validate the 1 year warranty. We reserve the right to accept or reject any core at our discretion.

We also offer a 45 day return policy on this product so you can purchase it with confidence. If you have any issues with the product, please reach out to us and we would be happy to help resolve any issue that may occur. 

Please be absolutely sure this is the correct one for your motor prior to purchasing. If you purchase this item incorrectly or change your mind and no longer want the item, we will accept a return within 45 days however, we will charge our initial shipping cost and a 20% restocking fee. If you have any questions, please contact us.

1978-1991 V4 outboards.  Please note that from 1985-1991, Johnson and Evinrude made 2 different styles of V4.  The 60 degree, or crossflow engine ran through all of these years.  Starting in 1985, they also made a 90 degree Looper engine, which had a bigger gearcase.  The units will interchange, but you'd need a different prop in order to run this on your larger 90 degree engine.  This will, however, be an exact interchange for all of the 1978-1991 60 degree crossflow engines.

This unit does have a single-piece driveshaft.

We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help!