- Brand: Johnson Evinrude
- Size: 85 88 90 100 110 115 140 HP
- Color: Primed
- Style: V4
- Condition: Used
- Notes: Freshwater - Good Condition!
- SKU: 40427 LRU
- Manufacturer Part Number: N/A
- Country of Manufacture: United States
- Motor & Engine Type: Johnson Evinrude
- Part Type: Motors, Engines & Components
- Other Part Number: N/A
- Surface Finish: Primed, Grey
- Warranty: 30 days
- Inventory Number: 40427 LRU
- Website Category: Lower Units
- Website Sub Category: Complete Lower Units
- UPC: N/A
- Shipping: $75.00
| Part Number | N/A |
| Additional Info | The lower unit is a late 80's model. This specific lower unit is in excellent condition from freshwater and is ready for installation. From the top of the water pump housing, the driveshaft measures approximately 20" long and has 20 splines. The propeller shaft has 13 splines. All of the splines are in great condition. Shifts in and out of gear smoothly but needs a shift rod seal. The propshaft is straight and there is no damage to this lower unit. The intake screens are intact. All you have to do is add oil and your propeller with hardware, and go boating! This unit comes with a 6 MONTH WARRANTY with the return of your core. Purchase with confidence! General Information
To obtain the 6 month warranty, you MUST send in your core lower unit. We will even pay to have your core shipped to us! Below is the criteria required to validate the warranty:
You will receive two copies of the terms and conditions for the lower unit one year warranty. One copy MUST be signed and returned with your core. Without a returned signed copy, the 6 month warranty will not be valid. Upon receipt of your core, we will inspect the unit to determine if it meets the criteria to validate the 1 year warranty. We reserve the right to accept or reject any core at our discretion. If you have any questions or concerns, please do not hesitate to contact us at 618-487-9499 and we would be happy to help! |
| Fits: | 1978-1991 V4 outboards. Please note that from 1985-1991, Johnson and Evinrude made 2 different styles of V4. The 60 degree, or crossflow engine ran through all of these years. Starting in 1985, they also made a 90 degree Looper engine, which had a bigger gearcase. The units will interchange, but you'd need a different prop in order to run this on your larger 90 degree engine. This will, however, be an exact interchange for all of the 1978-1991 60 degree crossflow engines. We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help! |
