1 YEAR WARRANTY Evinrude 2004-2012 ETEC 20" Lower Unit 40 50 60 HP

Part Number

N/A

Additional Info

This lower unit is in good used condition and we have taken the time to professionally inspect this lower unit. Upon our inspection, this unit shifts and spins smoothly with no binding.  The driveshaft splines have light wear and the prop shaft is straight.  The gears and clutch are in pretty good condition.  The unit has had the pinion gear changed with a used one in great condition.  The paint has been stripped and repainted black.  There are holes drilled for a previous planing fin. This unit has been fully resealed, pressure checked, and a new impeller installed. There has been a new skeggard installed.   Please refer to the photos to verify what is included in this listing and the condition these parts are in prior to ordering.  Please note that we cannot ship our lower units with oil in them, so this will need to be done prior to use! This unit comes with a 1 YEAR WARRANTY. Purchase with confidence!

Driveshaft measures - 19 7/8" from top of water pump housing to top of driveshaft.
Driveshaft spline count - 17
Prop shaft spline count - 13

General Information

• Freshwater condition
• New Impeller
• Pressure checked to 15 PSI
• Shafts checked for straightness

To obtain the 1 YEAR warranty, you MUST send in your core lower unit. We will even pay to have your core shipped to us! Below is the criteria required to validate the warranty:

• Core must be of rebuildable quality
• Cannot be locked up - driveshaft must spin
• Up to 30 days from the date of purchase to send in your core
• Covers mechanical aspects ONLY
• Warranty begins from date of purchase
• Core must be complete and cannot be missing parts

You will receive two copies of the terms and conditions for the lower unit 1 YEAR warranty. One copy MUST be signed and returned with your core. Without a returned signed copy, the 1 YEAR warranty will not be valid. 

Upon receipt of your core, we will inspect the unit to determine if it meets the criteria to validate the 1 YEAR warranty. We reserve the right to accept or reject any core at our discretion.

We offer a 45-day return policy so you can purchase this item with confidence. If you have any issues with the product, please reach out to us and we would be happy to help resolve any issue that may occur. Please be absolutely sure this is the correct one for your motor prior to purchasing.

If you purchase this item incorrectly or change your mind, we will accept a return within 45 days however, we will charge our initial shipping cost and a 20% restocking fee. If you have any questions, please contact us.

Location: Southcentral Outboards, Altamont, Illinois

Fits:

2004-2012 - 40 50 60 HP  - ETEC  - 2 cylinder - 2 stroke

We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help!