Volvo Penta Lower Unit 2.15:1 Gear Ratio AS-IS

• The paint has some scratches, scuffs, and fading, but nothing that will affect the performance.
• This lower unit spins smoothly.
• There is a little bit of corrorsion, please see pictures.
• When drained the oil was clean, with no metal shavings.
• There is no rust on the bearing.
• The driveshaft measures 4-7/8" long from the top of the bearing to the end of the shaft and has 17 splines.
• The prop shaft also has 17 splines.
• All splines are in good condition and straight. 

We advise changing impellers anytime you replace a lower unit.
You will need to add oil.

Because we are not resealing the unit and it is being sold as-is-, we will not accept returns on this item. Please be absolutely sure this is the correct one you are needing prior to purchasing!

Location: Southcentral Outboards, Altamont, Illinois

At this time, we are unsure of all the years and horsepowers that this will fit. If you need help identifying if this is the correct fit for your motor, please do not hesitate to contact us prior to purchasing and we would be happy to help!