Mercruiser Bravo III 3 Double Zinc 1988 - 2013 Sterndrive 1.68:1 Lower Unit

• 7 Inch Driveshaft  
• Will need resealed
• There is a chip in the skeg (please see pictures)

• Shifts and spins smoothly without binding
• Shafts checked for straightness
• Driveshaft splines show little to no wear
• Gears & clutch are in good condition with little wear on clutch surfaces
• Freshwater Condition
• Could not pressure check unit due to not having upper unit

Gear Ratio: 1.68:1

Driveshaft length from the top of the water pump to top of the shaft: 7"

Please add oil before use. This unit is shipped empty.

This is listed for repair.  We will NOT accept returns on this item for any reason. Please read the description carefully to see the issues this part has.

Location: Southcentral Outboards, Altamont, Illinois

This Mercury 8866G09 GC BRAVO III fits the following models and components:

Mercruiser Sterndrive Outdrives Bravo X Four S GEAR HOUSING(BRAVO THREE)

Mercruiser Sterndrive Outdrives BRAVO THREE Bravo 3 0W250000 & Up GEAR HOUSING(BRAVO THREE)

Mercruiser Sterndrive Outdrives BRAVO ONE Bravo One 0W250000 & Up GEAR HOUSING(BRAVO THREE)

Mercruiser Sterndrive Outdrives BRAVO X ONE Bravo X One 0W250000 & Up GEAR HOUSING(BRAVO THREE)

Mercruiser Sterndrive Outdrives BRAVO X TWO Bravo X 2 0W250000 & Up GEAR HOUSING(BRAVO THREE)

Mercruiser Sterndrive Outdrives BRAVO TWO Bravo 2 0W250000 & Up GEAR HOUSING(BRAVO THREE)

Mercruiser Sterndrive Outdrives BRAVO X THREE Bravo X 3 0W250000 & Up GEAR HOUSING(BRAVO THREE)

We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help!