439631 Johnson Evinrude 1998 Complete Powerhead 150 HP FICHT Ready to Install

• This powerhead is in good condition and ready for use.
• It was removed from a freshwater engine.
• When we recieved this powerhead, we did take the time to run a  compression test on this motor.
• We did removed the cylinder heads as well so we could get a visual inspection of the walls. They showed no scoring.
• When we did this there were no grooves and it was as smooth as can be!
• The throttle bodies open and close how they should! 
• Compression Readings
  
  #1 - 95 PSI      #2 - 99 PSI
  #3 - 95 PSI      #4 - 99 PSI
  #5 - 95 PSI      #6 - 99 PSI

If you order this incorrectly or change your mind within 45 days, you may return it with a 20% restocking fee and shipping.  You must contact us in order to facilitate that.  You cannot open a return on ebay in this case.

Location: Southcentral Outboards, Altamont, Illinois

1998 - 150 HP V6 FICHT

We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help!