439631 Johnson Evinrude 1998 Complete Powerhead 150 HP FICHT COMPRESSION CHECKED

This powerhead is in good condition and ready for use. It was removed from a freshwater engine. When we recieved this powerhead, we did take the time to run a  compression test on this motor. We did removed the cylinder heads as well so we could get a visual inspection of the walls. The throttle bodies open and close how they should! When we did this there were no grooves and it was as smooth as can be! There isn't any damage to either of the cylinder heads. Upon our inspection, we did notice that the rubber mounts will need to be replaced prior to use, please see pictures. Please note that this powerhead will need new head gaskets as well as a new base gasket. There is nothing stopping this from making a great replacement for your motor! Purchase with confidence!


Compression Readings

#1 - 95 PSI      #2 - 95 PSI
#3 - 95 PSI      #4 - 100 PSI
#5 - 95 PSI      #6 - 100 PSI

Please note that we will not accept returns for this item. Please be absolutely sure this is the correct one for your motor prior to purchasing.

Location: Southcentral Outboards, Altamont, Illinois

1998 - 150 HP V6 FICHT

We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help!