2006 & UP Mercury 20" Lower Unit 2.33:1 EFI 40 50 60 HP 1 YEAR WTY

This lower unit has a 2.33 to 1 ratio.  This does not come with the propeller or the propeller hardware. This unit spins and shifts smoothly.  The prop shaft is straight and the driveshaft splines are not showing any signs of wear.   There are some scuffs, scratches, and missing paint, but nothing that will affect the overall performance as it is purely cosmetic. The skeg has been welded at the tip. The gears and clutch are in good condition with the clutch showing slight signs of wear.  The shop says that this is still in good condition despite the slight wear.  This unit has ben re-sealed, pressure checked, and has had a new impeller installed.  Please note that we do not ship our lower units with oil. Upon receipt of the unit, oil will have to be added before use. This will make a great replacement for your motor! Purchase with confidence!

Driveshaft measures - 21 -1/4" from top of water pump housing to top of driveshaft
Driveshaft spline count - 17
Prop shaft spline count - 15

General Information

• Freshwater condition
• Opened & Inspected
• Professionally Cleaned
• New Impeller
• Pressure checked to 12 PSI minimum
• Fully Resealed
• Shafts checked for straightness

Criteria to validate your 1 year warranty:

• Core must be of equal or greater value
• Cannot be locked up - driveshaft must spin
• Up to 30 days from the date of purchase to send in your core
• Covers mechanical aspects ONLY
• Warranty begins from date of purchase

You will receive two copies of the terms and conditions for the lower unit one year warranty. One copy MUST be signed and returned with your core. Without a returned signed copy, the one year warranty will not be valid. 

Upon receipt of your core, we will inspect the unit to determine if it meets the criteria to validate the 1 year warranty. We reserve the right to accept or reject any core at our discretion. If you have any questions or concerns, please do not hesitate to contact us and we would be happy to help!

We offer a 30 day return policy on this product so you can purchase it with confidence. If you have any issues with the product, please reach out to us and we would be happy to help resolve any issue that may occur. Please be absolutely sure this is the correct one for your motor prior to purchasing.

Location: Southcentral Outboards, Altamont, Illinois

We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help!