- Brand: BRP
- Size: All V6's
- Color: Black
- Style: Loopers & Ficht & ETEC- V6 -20"
- Condition: Seller Refurbished
- Notes: Cleaned, Inspected & Tested!
- SKU: 47644 LRU
- Manufacturer Part Number: N/A
- Country of Manufacture: Canada
- Motor & Engine Type: BRP
- Part Type: Motors, Engines & Components
- Other Part Number: N/A
- Surface Finish: Painted, Black
- Inventory Number: 47644 LRU
- Website Category: Lower Units
- Website Sub Category: Complete Lower Units
- UPC: N/A
- Shipping: $75.00
| Part Number | N/A |
| Additional Info | This lower unit was removed from a freshwater engine and is in great used condition. This unit spins and shifts smoothly with no binding and the prop shaft is straight. The driveshaft splines are showing slight wear. When the unit was drained of oil, it was clean and free of metal and water. The gears and clutch are in good condition with slight clutch wear. The paint is a little beat up with a few scratches and the skeg has some minor chips and this does not affect the integrity or performance of this lower unit. The unit is fully resealed and pressure checked with a new impeller installed. Top of the water pump to top of the Driveshaft measures - 19" Driveshaft spline count - 13 Prop shaft spline count - 15 General Information
Criteria to validate your 1 year warranty:
You will receive two copies of the terms and conditions for the lower unit one year warranty. One copy MUST be signed and returned with your core. Without a returned signed copy, the one year warranty will not be valid. Upon receipt of your core, we will inspect the unit to determine if it meets the criteria to validate the 1 year warranty. We reserve the right to accept or reject any core at our discretion. If you have any questions or concerns, please do not hesitate to contact us and we would be happy to help! We offer a 30 day return policy on this product so you can purchase it with confidence. If you have any issues with the product, please reach out to us and we would be happy to help resolve any issue that may occur. Please be absolutely sure this is the correct one for your motor prior to purchasing. |
| Fits: | 1991 & UP (Looper, V6, Ficht & ETEC) - All V6's (this unit is best used on 200 HP & UP with the execption of whats below. 2008 & UP - 135 150 HP HO Also, please note that this is Lightning II lower unit. ***After 1991, what Johnson and Evinrude did was to use different driveshafts with different lower units. In short, you may need to use your original driveshaft from your old lower unit in order to install this unit. The spline counts were all the same and many of the shafts would interchange but there are some cases where the driveshaft on one unit was shorter or longer than on another. If you are not sure it has the same driveshaft, please consult a mechanic or a manual for the steps to change out the 2 piece driveshaft prior to installation. If you would like to have us change that shaft out, please contact us prior to purchase. We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help! |
