1991-2006 Mercury 20" Lower Unit 50 55 60 HP 2 Stroke 3 CYL 1 YEAR WARRANTY

This lower unit was removed from a freshwater engine and is in excellent condition. From the top of the water pump to the end of the driveshaft, it measures approximately 21" long and has 11 splines. The spline count on the propeller shaft is 13. All of the splines are in great condition. When we opened this lower unit the gears looked great. The shafts are straight and shift/turn smoothly. We installed a new impeller and this unit holds pressure. There are only minor cosmetic flaws in the paint, such as scuffs and scratches, but this is purely cosmetic. Please note that this lower unit does not come with the trim tab, propeller, or the propeller hardware. Please remember to add oil before use. You can purchase this lower unit with confidence on a 1 YEAR WARRANTY in exchange for your core.

General Information

• Freshwater condition
• Opened & Inspected
• Professionally Cleaned
• New Impeller
• Pressure checked to 12 PSI minimum
• Fully Resealed
• Shafts checked for straightness

Criteria to validate your 1 year warranty:

• Core must be of equal or greater value
• Cannot be locked up - driveshaft must spin
• Up to 30 days from the date of purchase to send in your core
• Covers mechanical aspects ONLY
• Warranty begins from date of purchase

You will receive two copies of the terms and conditions for the lower unit one year warranty. One copy MUST be signed and returned with your core. Without a returned signed copy, the one year warranty will not be valid. 

Upon receipt of your core, we will inspect the unit to determine if it meets the criteria to validate the 1 year warranty. We reserve the right to accept or reject any core at our discretion. If you have any questions or concerns, please do not hesitate to contact us and we would be happy to help!

We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help!