Johnson Evinrude 1979-91 20" Long Lower Unit 150 175 200 225 HP 1 YEAR WTY

• New impeller and Fully Resealed
• Primed and Ready for paint
• Ready to install
• 1 Year Warranty

• This unit spins and shifts smoothly with no binding
• The propeller shaft is straight and the driveshaft splines are in good condition. 
• The paint has been stripped and a coat of primer applied and ready for your favorite color!
• The cavitation plate has pre-drilled holes in preparation for a planing fin which will not affect performance or integrity
• There is a chip in the end of the skeg - please refer to the photos for more details
• This does not include the trim tab
• The driveshaft measures 18-7/8" from the top of the water pump and has 20 splines. The prop shaft has 15 splines.
• This unit is fully resealed and pressure checked with a new impeller installed. 
• Backed by a 1 year warranty you can purchase this unit with confidence! 
• Please refer to the photos to verify what is included in this listing and the condition these parts are in prior to ordering.
  
  We drain all units of oil prior to shipping.  PLEASE REMEMBER TO ADD OIL BEFORE USE
  
  General Information
• READY TO INSTALL
• Pressure checked to 12 PSI
• New impeller 
• Fully resealed
• Shafts checked for straightness
• Shifts and spins smoothly

**Due to shipping restrictions, lower unit are shipped empty. Every lower unit requires new oil to be added when you receive it.

To obtain the 1 year warranty, you MUST send in your core lower unit. We will even pay to have your core shipped to us! Below is the criteria required to validate the warranty:

• Core must be of rebuildable quality
• Cannot be locked up - driveshaft must spin
• Up to 30 days from the date of purchase to send in your core
• Covers mechanical aspects ONLY
• Warranty begins from date of purchase
• Core must be complete and cannot be missing parts

You will receive two copies of the terms and conditions for the lower unit 1 year warranty. One copy MUST be signed and returned with your core. Without a returned signed copy, the 1 year warranty will not be valid. 

Upon receipt of your core, we will inspect the unit to determine if it meets the criteria to validate the 1 year warranty. We reserve the right to accept or reject any core at our discretion.

We offer a 30 day return policy on this product so you can purchase it with confidence. If you have any issues with the product, please reach out to us and we would be happy to help resolve any issue that may occur. Please be absolutely sure this is the correct one for your motor prior to purchasing.

We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help!