1979-1991 Johnson Evinrude XL Lower Unit 150 175 200 225 235 HP V6 1 YEAR WTY!

Part Number

N/A

Additional Info

This Johnson Evinrude lower unit is in excellent condition and ready for installation. From the base of the water pump to the top, the driveshaft measures approximately 24-3/8" long and has 20 splines. The propeller shaft has 15 splines. Please note that this does not come with the propeller, propeller hardware, or trim tab. All of these things can be used from your current lower unit. Upon inspection, we did notice some pitting throughout the driveshaft and when looking down into the housing, but this is still full functional. We have taken the time to professionally strip and prime this lower unit. This can be left as is, or roughed up for a new coat of paint! We cannot ship our lower units with oil and therefore, we have drained the unit. This will have to be added prior to installation. Purchase with confidence!

We do not take returns on incorrectly ordered items. If you are unsure whether this is the correct lower unit and correct length driveshaft for your application please contact us and we will be happy to help you buy the correct product. This product is still covered by the mechanical warranty, offered in exchange for your core, that we have stated in the listing.

General Information

• Freshwater condition
• Opened & Inspected
• Professionally Cleaned
• New Impeller
• Pressure checked to 12 PSI minimum
• Fully Resealed
• Shafts checked for straightness
  

To obtain the 1 year warranty, you MUST send in your core lower unit. We will even pay to have your core shipped to us! Below is the criteria required to validate the warranty:

• Core must be of rebuildable quality
• Cannot be locked up - driveshaft must spin
• Up to 30 days from the date of purchase to send in your core
• Covers mechanical aspects ONLY
• Warranty begins from date of purchase
• Core must be complete and cannot be missing parts
  
  

You will receive two copies of the terms and conditions for the lower unit one year warranty. One copy MUST be signed and returned with your core. Without a returned signed copy, the one year warranty will not be valid. 

Upon receipt of your core, we will inspect the unit to determine if it meets the criteria to validate the 1 year warranty. We reserve the right to accept or reject any core at our discretion. If you have any questions or concerns, please do not hesitate to contact us at 618-487-9499 and we would be happy to help!

Fits:

1979-1991 - 150 175 200 225 235 HP V6 - Single Piece Driveshaft

We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help!