1979-1988 Johnson Evinrude 20" Lower Unit 60 65 70 75 HP 3 Cyl 1 YEAR WTY!

 
$1,200.00
International Shipping Quote
  • Brand: Johnson Evinrude
  • Size: 60 65 70 75 HP
  • Color: Primed Grey
  • Style: 3 Cylinder - Long
  • Condition: Used
  • Notes: New Impeller & Pressure Checked!
  • SKU: 35398 LRU
  • Manufacturer Part Number: N/A
  • Country of Manufacture: United States
  • Motor & Engine Type: Johnson Evinrude
  • Part Type: Motors, Engines & Components
  • Other Part Number: N/A
  • Surface Finish: Primed, Grey
  • Warranty: 30 days
  • Inventory Number: 35398 LRU
  • Website Category: Lower Units
  • Website Sub Category: Complete Lower Units
  • UPC: N/A
  • Shipping: $75.00
Part Number

N/A

Additional Info

This specific lower unit is in good freshwater condition. We have taken the time to professionally strip and prime this lower unit. From the top of the water pump, it measures approximately 19-3/8" long. There are 4 splines on the top of the driveshaft and 13 on the propeller shaft. We have added a new skeggard to this lower unit, which is a $100 value itself. We did do this because the skeg was broken off. The intake screens are intact with no signs of cracking. There are  pre-drilled holes on the cavitation plate, where a planing fin used to be. This does come with the trim tab, but not the propeller or the propeller hardware. Also, please note that we cannot ship lower units with oil in them and this will have to be added prior to installation.  Given our unprecedented 1 year warranty on every lower unit, you will never find a better deal on an OEM lower unit.  Purchase with confidence!  

General Information

  • Freshwater condition
  • Professionally Cleaned
  • New Impeller
  • Pressure checked to 12 PSI minimum
  • Shafts checked for straightness
  • Shifts and spins smoothly

To obtain the 1 year warranty, you MUST send in your core lower unit. We will even pay to have your core shipped to us! Below is the criteria required to validate the warranty:

  • Core must be of rebuildable quality
  • Cannot be locked up - driveshaft must spin
  • Up to 30 days from the date of purchase to send in your core
  • Covers mechanical aspects ONLY
  • Warranty begins from date of purchase
  • Core must be complete and cannot be missing parts

You will receive two copies of the terms and conditions for the lower unit one year warranty. One copy MUST be signed and returned with your core. Without a returned signed copy, the one year warranty will not be valid. 

Upon receipt of your core, we will inspect the unit to determine if it meets the criteria to validate the 1 year warranty. We reserve the right to accept or reject any core at our discretion. If you have any questions or concerns, please do not hesitate to contact us at 618-487-9499 and we would be happy to help! 

Fits:

1979-1988 -  60 65 70 75 HP 3 Cylinder

Identical to earlier 1973-75 lower unit, but up is forward on this
model and it’s opposite on earlier model.Also, the driveshaft is shorter than the earlier models. Approximately ½”, measuring 19-1/4” 

 

1979-1988 Johnson Evinrude 20" Lower Unit 60 65 70 75 HP 3 Cyl 1 YEAR WTY!
1979-1988 Johnson Evinrude 20" Lower Unit 60 65 70 75 HP 3 Cyl 1 YEAR WTY!1979-1988 Johnson Evinrude 20" Lower Unit 60 65 70 75 HP 3 Cyl 1 YEAR WTY!1979-1988 Johnson Evinrude 20" Lower Unit 60 65 70 75 HP 3 Cyl 1 YEAR WTY!1979-1988 Johnson Evinrude 20" Lower Unit 60 65 70 75 HP 3 Cyl 1 YEAR WTY!1979-1988 Johnson Evinrude 20" Lower Unit 60 65 70 75 HP 3 Cyl 1 YEAR WTY!1979-1988 Johnson Evinrude 20" Lower Unit 60 65 70 75 HP 3 Cyl 1 YEAR WTY!1979-1988 Johnson Evinrude 20" Lower Unit 60 65 70 75 HP 3 Cyl 1 YEAR WTY!1979-1988 Johnson Evinrude 20" Lower Unit 60 65 70 75 HP 3 Cyl 1 YEAR WTY!