- Brand: Mercury
- Size: 135 150 175 200 HP
- Color: Black
- Style: 1.75:1 Ratio - 8/15 splines - V6
- Condition: Seller Refurbished
- Notes: Opened, Inspected & Tested!
- SKU: 32336 LRU
- Manufacturer Part Number: N/A
- Country of Manufacture: United States
- Motor & Engine Type: Mercury
- Part Type: Motors, Engines & Components
- Other Part Number: N/A
- Surface Finish: Painted, Black
- Warranty: 30 days
- Inventory Number: 32336 LRU
- Website Category: Lower Units
- Website Sub Category: Complete Lower Units
- UPC: N/A
| Part Number | N/A |
| Additional Info | This lower unit is in good freshwater condition and is ready for your engine. The paint on the unit is in pretty good shape with only minor flaws. There are not any cracks or breaks in the housing whatsoever. The skeg is fully intact with only minor dings. This does come not with the trim tab, the propeller, or the propeller hardware. From the top of the water pump, the driveshaft measures approximately 21-1/4" long and has 8 splines. The propeller shaft has 15 splines. The splines are in good condition and are not cracked or chipped. We cannot ship lower units with oil in them so this must be done prior to installation. Given our unprecedented 1 year warranty on every lower unit, you will never find a better deal on an OEM lower unit. Purchase with confidence! General Information
To obtain the 1 year warranty, you MUST send in your core lower unit. We will even pay to have your core shipped to us! Below is the criteria required to validate the warranty:
Upon receipt of your core, we will inspect the unit to determine if it meets the criteria to validate the 1 year warranty. When you receive your purchased lower unit, there will be installation paperwork included in the package. One copy of the paperwork must be signed returned with your core. If it does not, you will be contacted and granted a 30 day warranty. We reserve the right to accept or reject any core at our discretion. If you have any questions or concerns, please do not hesitate to contact us at 618-487-9499 and we would be happy to help! |
| Fits: | 1976-2005 - 135 150 175 200 HP - 1.75:1 Gear Ratio Mercury V6’s originally used a preload pin from 1976-1988. Aftermarket replacements and 1989 & up V6 lower units did not. Therefore, if you have a V6 lower unit with a preload pin, it could only be used only from 1976-1988. If you have a lower unit that does not have a preload pin, it can be used from 1976-2005. We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help! |
