- Brand: Mercury
- Size: 135 150 175 200 HP
- Color: Black
- Style: 1.87:1 Ratio - 8/15 splines - V6
- Condition: Seller Refurbished
- Notes: Opened, Inspected & Tested!
- SKU: 36153 LRU
- Manufacturer Part Number: N/A
- Country of Manufacture: United States
- Motor & Engine Type: Mercury
- Part Type: Motors, Engines & Components
- Other Part Number: N/A
- Surface Finish: Painted, Black
- Warranty: 30 days
- Inventory Number: 36153 LRU
- Website Category: Lower Units
- Website Sub Category: Complete Lower Units
- UPC: N/A
- Shipping: $75.00
| Part Number | N/A |
| Additional Info |
This lower unit does have a 1.87:1 gear ratio and was removed from a freshwater engine. When we opened this up, we noticed that the gears were in great condition. There are scuffs, scratches, and chips in the paint, but this is very common in lower units. Upon our inspection, we did notice a slight bend to the skeg, but this can be straightened. There is also a small chip in the cavitation plate and on the skeg, but this will not affect the overall performance. This does not come with the propeller, or propeller hardware. This does come with the trim tab and the anode. This will come exactly as pictured. The unit has been drained of oil and this will need to be added prior to installation. Purcahse with confidence! General Information
Criteria to validate your 1 year warranty:
You will receive two copies of the terms and conditions for the lower unit one year warranty. One copy MUST be signed and returned with your core. Without a returned signed copy, the one year warranty will not be valid. Upon receipt of your core, we will inspect the unit to determine if it meets the criteria to validate the 1 year warranty. We reserve the right to accept or reject any core at our discretion. If you have any questions or concerns, please do not hesitate to contact us at 618-487-9499 and we would be happy to help! |
| Fits: | 1976-2005 - 135 150 175 200 HP - 1.87:1 Gear Ratio If you have a V6 lower unit with a preload pin, it could only be used only from 1976-1988. If you have a lower unit that does not have a preload pin, it can be used from 1976-2005. Please note that this lower unit has a 1.87:1 gear ratio. These can be used on a 135, 150, and 200 HP motors as well, but the propeller will need to be switched out to keep you within the reccomended RPM. We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help! |
