1999-06 Mercury 20” Lower Unit 75 90 115 HP Carbureted 4-Stroke 2.07:1 1 YR WTY

• Fully Resealed with a new impeller
• Professionally inspected
• 1 year mechanical warranty in exchange for your spinning core!

• This specific lower unit is in greatcondition.
• Professionally inspected
• The skeg and paint have some scuffs and chips and this does not affect performance or integrity.
• Skeg has the tip chipped off, but this will not affect performance
• Cavitation plate has holes drilled in it for a planing fin and has been narrowed towards the rear - please see photos
• This unit shifts and spins well with no binding. 
• Oil was dirty, but showed no signs of heavy metal or water
• The driveshaft splines are in good condition and the prop shaft is straight. 
• This unit has been fully resealed, pressure checked, and a new impeller installed. 
• Please refer to the photos for more detail regarding the content and condition of this listing and order with confidence!
  
  Driveshaft Length: 21-1/4" From the top of the waterpump to the top of the shaft
  Driveshaft Splines: 18
  Propeller shaft Splines: 15 

General Information

• Freshwater condition
• Opened & Inspected
• Professionally Cleaned
• Pressure checked to 12 PSI minimum
• Fully Resealed
• Shafts checked for straightness
• 1 year mechanical warranty

Criteria to validate your 1 year warranty:

• Core must be of equal or greater value
• Cannot be locked up - driveshaft must spin
• Up to 30 days from the date of purchase to send in your core
• Covers mechanical aspects ONLY
• Warranty begins from date of purchase

We also offer a 45 day return policy on this product so you can purchase it with confidence. If you have any issues with the product, please reach out to us and we would be happy to help resolve any issue that may occur. 

Please be absolutely sure this is the correct one for your motor prior to purchasing. If you purchase this item incorrectly or change your mind and no longer want the item, we will accept a return within 45 days however, we will charge our initial shipping cost and a 20% restocking fee. If you have any questions, please contact us. 

Location: Southcentral Outboards, Altamont, Illinois

We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help!