1 YEAR WARRANTY 20" Mercury 1991-06 Lower Unit 50 55 60 HP 2 Stroke 3 Cylinder

This lower unit was removed from a freshwater engine and is in excellent condition. From the top of the water pump to the end of the driveshaft, it measures approximately 20 3/4" long and has 11 splines. The spline count on the propeller shaft is 13. Thgis unit spins smoothly with no binding.  The driveshaft splines are in good condition and the prop shaft is straight.  When this unit was drained of oil, it was found to be clean and free of metal or water.  The gears and clutch are in good condition.  The paint is a little banged up but the fish don't mind and this dude works like a charm. The skeg has been ground down, please see pictures. The unit has been fully resealed and pressure checked with a new impeller installed.  This listing also includes the trim tab.  Please refer to the photos to verify what is included in this listing and the condition these parts are in prior to ordering.  You can purchase this lower unit with confidence on a 1 YEAR WARRANTY in exchange for your core.

***Please Note***** We drain all units of oil prior to shipping and you will be required to add oil prior to use.

General Information

• Freshwater condition
• Opened & Inspected
• Professionally Cleaned
• Oil clean and free of metal and water
• New Impeller
• Pressure checked to 12 PSI minimum
• Fully Resealed
• Shafts checked for straightness

Criteria to validate your 1 year warranty:

• Core must be of equal or greater value
• Cannot be locked up - driveshaft must spin
• Up to 30 days from the date of purchase to send in your core
• Covers mechanical aspects ONLY
• Warranty begins from date of purchase

You will receive two copies of the terms and conditions for the lower unit one year warranty. One copy MUST be signed and returned with your core. Without a returned signed copy, the one year warranty will not be valid. 

Upon receipt of your core, we will inspect the unit to determine if it meets the criteria to validate the 1 year warranty. We reserve the right to accept or reject any core at our discretion. If you have any questions or concerns, please do not hesitate to contact us and we would be happy to help!

We offer a 30 day return policy on this product so you can purchase it with confidence. If you have any issues with the product, please reach out to us and we would be happy to help resolve any issue that may occur. Please be absolutely sure this is the correct one for your motor prior to purchasing.

Location: Southcentral Outboards, Altamont, Illinois

We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help!