1 YEAR WTY! Johnson Evinrude 1995-06 60-Degree 20" Lower Unit 75 90 100 115 HP

All of our lower units are in great, freshwater condition unless otherwise stated. We have taken the time to professionally clean, inspect, and pressure check this lower unit to give you confidence about your purchase! This is guaranteed to be in good, working condition. This unit spins and shifts smoothly with no binding and the prop shaft is straight.  The skeg has been ground down.  The driveshaft splines are showing slight wear.  When the unit was drained of oil it was found to be free of metal and water.  The gears and clutch are ingood condition with slight clutch wear.  The paint is a little beat up and the trim tab has a large chip out of it.  The unit is fully resealed and pressure checked with a new impeller installed.  From the top of the water pump to the end of the driveshaft, it measures approximately 18-1/8" long. There are 20 splines on the driveshaft and 13 on the propeller shaft. Please refer to the photos to verify what is included in this listing and the condition that this unit is in prior to ordering.  Backed by a 1 year warranty, this Johnson lower unit is an excellent replacement.   This lower unit is ready for your outboard and will just need oil added to go boating! 

Please remember that we drain this unit of all oil prior to shipping and you will need to add new oil prior to use.

Criteria to validate your 1 year warranty:

• Core must be of equal or greater value
• Cannot be locked up - driveshaft must spin
• Up to 30 days from the date of purchase to send in your core
• Covers mechanical aspects ONLY
• Warranty begins from date of purchase

You will receive two copies of the terms and conditions for the lower unit one year warranty. One copy MUST be signed and returned with your core. Without a returned signed copy, the one year warranty will not be valid. 

Upon receipt of your core, we will inspect the unit to determine if it meets the criteria to validate the 1 year warranty. We reserve the right to accept or reject any core at our discretion. If you have any questions or concerns, please do not hesitate to contact us and we would be happy to help!

We offer a 30 day return policy on this product so you can purchase it with confidence. If you have any issues with the product, please reach out to us and we would be happy to help resolve any issue that may occur. Please be absolutely sure this is the correct one for your motor prior to purchasing.

Location: Southcentral Outboards, Altamont, Illinois

We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help!