$1,250.00
Details
- Brand: Johnson Evinrude
- Size: All V6's
- Color: Blue
- Style: Loopers & Ficht & ETEC- V6 -20"
- Condition: Seller Refurbished
- Notes: Cleaned, Inspected & Tested!
- SKU: 31227 LRU
- Manufacturer Part Number: N/A
- Country of Manufacture: Canada
- Motor & Engine Type: Johnson Evinrude
- Part Type: Motors, Engines & Components
- Other Part Number: N/A
- Surface Finish: Painted, Blue
- Warranty: 30 days
- Inventory Number: 31227 LRU
- Website Category: Lower Units
- Website Sub Category: Complete Lower Units
- UPC: N/A
| Part Number | N/A |
| Additional Info | This lower unit was removed from a freshwater engine and is in great condition. Upon inspeciton, we did notice a small chip in the bottom of the skeg, but this will not affect anything. There is a pretty big chip out of the top of the cavitation plate near the front of the unit. Please see pictures. The unit should install just fine. This is the lightning style gearcase housing. The paint is in overall great shape with only minor spots of scuffs and scratches. As noticed, this is missing the trim tab and anode. When building this unit, our mechanic did replace the forward gear. The unit has been drained of oil and this will need to be added prior to installation. Driveshaft measures - 19-1/4" Driveshaft spline count - 20 Prop shaft spline count - 15 ***After 1991, what Johnson and Evinrude did was to use different driveshafts with different lower units. In short, you may need to use your original driveshaft from your old lower unit in order to install this unit. The spline counts were all the same and many of the shafts would interchange but there are some cases where the driveshaft on one unit was shorter or longer than on another. If you are not sure it has the same driveshaft, please consult a mechanic or a manual for the steps to change out the 2 piece driveshaft prior to installation. If you would like to have us change that shaft out, please contact us prior to purchase. General Information
Criteria to validate your 1 year warranty:
|
| Fits: | 1991 & UP (Looper, V6, Ficht & ETEC) - All V6's This unit would not be recommended for a high output (HO) ETEC as a replacement for a magnum lower unit. Magnum I and Magnum II lower units use larger diameter gears for those units in comparison to the gear sizes for this unit. Also, please note that this is Lightning I lower unit. |
