- Brand: Johnson Evinrude
- Size: All V6's
- Color: Blue
- Style: V6 -20" Shaft
- Condition: Seller Refurbished
- Notes: Cleaned, Inspected & Tested!
- SKU: 46635 LRU
- Manufacturer Part Number: N/A
- Country of Manufacture: Canada
- Motor & Engine Type: Johnson Evinrude
- Part Type: Motors, Engines & Components
- Other Part Number: N/A
- Surface Finish: Painted, Blue
- Inventory Number: 46635 LRU
- Website Category: Lower Units
- Website Sub Category: Complete Lower Units
- UPC: N/A
- Shipping: $75.00
| Part Number | N/A |
| Additional Info | This lower unit was removed from a freshwater engine and is in great condition. There are some minor scratches in the paint and expecially on the skeg where there is also a few chips. This is purely cosmetic and does not affect performance or integrity. This does not come with the trim tab. It shifts and spins smoothly. The driveshaft splines have slight wear and the prop shaft is straight. There is a small crack in the cavitation plate. The gears and clutch are in good condition with slight wear on the clutch. This unit has been fully resealed, pressure checked, and a new impeller installed. The unit has been drained of oil and this will need to be added prior to installation. Driveshaft measures - 19-1/4" Driveshaft spline count - 20 Prop shaft spline count - 15 ***After 1991, what Johnson and Evinrude did was to use different driveshafts and shift rods with different lower units. In short, you may need to use your original driveshaft and shift rod from your old lower unit in order to install this unit. The spline counts were all the same and many of the shafts would interchange but there are some cases where the driveshaft on one unit was shorter or longer than on another. If you are not sure it has the same driveshaft, please consult a mechanic or a manual for the steps to change out the 2 piece driveshaft prior to installation. If you would like to have us change that shaft out, please contact us prior to purchase. PLEASE REMEMBER TO ADD OIL BEFORE INSTALLATION. General Information
Criteria to validate your 1 year warranty:
You will receive two copies of the terms and conditions for the lower unit one year warranty. One copy is for your records and the other copy MUST be signed and returned with your core. Without a returned signed copy, the one year warranty will not be valid. You are responsible for returning the paperwork with your core. The one warranty ONLY covers the mechanical aspects of the lower unit. We have a 30-day return policy for all circumstances. If you have any questions or concerns, please do not hesitate to contact us and we would be happy to help!We offer a 30 day return policy on this product so you can purchase it with confidence. If you have any issues with the product, please reach out to us and we would be happy to help resolve any issue that may occur. Please be absolutely sure this is the correct one for your motor prior to purchasing. Location: Southcentral Outboards, Altamont, Illinois |
| Fits: | 1991 & UP (Looper, V6, Ficht & ETEC) - All V6's ***This unit would not be recommended for a high output (HO) ETEC as a replacement for a magnum lower unit. Magnum I and Magnum II lower units use larger diameter gears for those units in comparison to the gear sizes for this unit. ** Also, please note that this is Lightning I lower unit. We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help! |
