Yamaha 1995 & UP Lower Unit 40 50 HP 20" Long 2 Stroke 1 YEAR WARRANTY

• This lower unit was removed from a freshwater engine and is in good condition. 
• The driveshaft has 14 splines and the propeller shaft has 13 splines. 
• From the top of the water pump to the end of the driveshaft, it measures approximately 20 1/2" long.
• This unit shifts and spins smoothly with no binding, and the prop shaft is straight.
• The driveshaft splines are in great shape.
• The units oil was clean and free of metal and water.
• The paint is a little beat up.
• This unit is missing the zink.
• The gears and clutch are in good condition. 
• Unit has been fully resealed, pressure checked, with a new impeller installed and comes with a 1 year warranty. 
• Please refer to the photos to verify what is included in this listing and the condition this unit is in prior to ordering. 
• Backed by a 1 year warranty you can purchase this lower unit with confidence!

General Information

• Freshwater condition
• Opened & Inspected
• Professionally Cleaned
• New Impeller
• Pressure checked to 12 PSI minimum
• Fully Resealed
• Shafts checked for straightness
  
• 1 year mechanical warranty

To obtain the 1 year warranty, you MUST send in your core lower unit. We will even pay to have your core shipped to us! Below is the criteria required to validate the warranty:

• Core must be of rebuildable quality
• Cannot be locked up - driveshaft must spin
• Up to 30 days from the date of purchase to send in your core
• Covers mechanical aspects ONLY
• Warranty begins from date of purchase
• Core must be complete and cannot be missing parts
  
  

Upon receipt of your core, we will inspect the unit to determine if it meets the criteria to validate the 1 year warranty. The unit must be complete and cannot be locked up. It must spin. We reserve the right to accept or reject any core at our discretion.

We offer a 30 day return policy on this product so you can purchase it with confidence. If you have any issues with the product, please reach out to us and we would be happy to help resolve any issue that may occur. Please be absolutely sure this is the correct one for your motor prior to purchasing.

Location: Southcentral Outboards, Altamont, Illinois

We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help!