Freshwater 1 YEAR WARRANTY 20" Johnson Evinrude 1993-2005 Lower Unit 40 48 50 HP

This lower unit is in great used condition and was removed from a freshwater setup. We have inspected this unit to guarantee it to be in great, working condition. This unit shifts and spins smoothly with no binding. The prop shaft is straight and the  driveshaft splines are showing slight wear.  The unit had dirty oil but was free from all metal and water.  The gears and clutch are in good condition with some slight clutch wear noted.  The paint has some scuffs and scratches, there is some slight damage on the bottom of the skeg, and the cavitation plate also has holes predrilled.  None of this should affect the performance or integrity of this unit. This unit has been fully resealed and pressure checked with a new impeller.  Please refer to the photos to see what is included in this listing and the condition that it is in.  Backed by a 1 year warranty with a core return you cannot find a better deal on a quality, used, freshwater lower unit! Purchase with confidence.

Please note:  prior to shipping we are required to remove all oil.  You will need to add oil back to this unit prior to use.   

Driveshaft measures - 19-1/2" from top of water pump housing to top of driveshaft.
Driveshaft spline count - 17
Prop shaft spline count - 13

General Information

• Excellent freshwater condition
• Gears and clutch in good condition showing only slight wear
• Pressure checked to 12 PSI minimum
• New impeller
• Trim tab and screens in good condition
• Fully Resealed
• Shafts checked for straightness

Criteria to validate your 1 year warranty:

• Core must be of equal or greater value
• Cannot be locked up - driveshaft must spin
• Up to 30 days from the date of purchase to send in your core
• Covers mechanical aspects ONLY
• Warranty begins from date of purchase

You will receive two copies of the terms and conditions for the lower unit one year warranty. One copy MUST be signed and returned with your core. Without a returned signed copy, the one year warranty will not be valid. 

Upon receipt of your core, we will inspect the unit to determine if it meets the criteria to validate the 1 year warranty. We reserve the right to accept or reject any core at our discretion. If you have any questions or concerns, please do not hesitate to contact us and we would be happy to help!

We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help!