This lower unit is in great condition. The driveshaft measures 21-1/2 inches from the top of the water pump to the end of the pin. The 13 splines on the propeller shaft and the 11 splines on the driveshaft and all in excellent condition. There are some cosmetic flaws such as scuffs and scratches in the paint and housing, but this will not affect any performance aspect of this lower unit. Please note that this does have holes drilled into the cavitation plate where a planing fin once was. We have added a brand new skeggard, which is a $100 value in itself. There is no pitting in the housing. The gears on the inside are in excellent condition. Purchase with confidence! Please remember to add oil before use.
General Information
Freshwater condition
Opened & Inspected
Professionally Cleaned
New Impeller
Pressure checked to 12 PSI minimum
All seals replaced
Shafts checked for straightness
1 year mechanical warranty
To obtain the 1 year warranty, you MUST send in your core lower unit. We will even pay to have your core shipped to us! Below is the criteria required to validate the warranty:
Core must be of rebuildable quality
Cannot be locked up - driveshaft must spin
Up to 30 days from the date of purchase to send in your core
Covers mechanical aspects ONLY
Warranty begins from date of purchase
Core must be complete and cannot be missing any parts
Upon receipt of your core, we will inspect the unit to determine if it meets the criteria to validate the 1 year warranty. When you receive your purchased lower unit, there will be installation paperwork included in the package. One copy of the paperwork must be signed returned with your core. If it does not, you will be contacted and granted a 30 day warranty. We reserve the right to accept or reject any core at our discretion. If you have any questions or concerns, please do not hesitate to contact us at 618-487-9499 and we would be happy to help!
Fits:
1971-1979 40 50 60 70 HP 2 & 3 Cylinder
This unit interchangeable with 1980-1986 and 1987-1997 models but different housing on this one (rounded cavitation plate on this one). This will not fit the 65hp 3 cylinder engine.
