Johnson Evinrude 1983 & 1984 Fully Dressed Powerhead 40 50 60 HP

• Removed from a freshwater engine 
• Engine had good spark 
• Missing plastic cover over wiring and throttle assembly 
• Solenoid bracket was off this when we recieved it so you'll need a couple of pieces from your original unit.
• Compression/Leakdown was CYL 1: 105  CYL 2: 105 (This is a touch low but it was tested on a cold engine.  Given some fresh oil, gas, and an hour of run time, this should come up some).
• Ready to install

If you order this incorrectly or change your mind within 45 days, you may return it with a 20% restocking fee and shipping.  You must contact us in order to facilitate that.  You cannot open a return on ebay in this case.

Location: Southcentral Outboards, Altamont, Illinois

We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help!