Evinrude 2001-2005 FICHT Powerhead 200 225 250 HP V6 Ready To Install

• Upon being opened and inspected, motor had compression readings slightly off- between 120 & 135 PSI.
• Walls still have crosshatching and no scoring on walls or pistons.
• If you run this motor for an hour, those readings should even out.  It needs heat, gas, and oil.
• Head gasket will also need replaced, due to inspection. 

If you order this incorrectly or change your mind within 45 days, you may return it with a 20% restocking fee and shipping.  You must contact us in order to facilitate that.  You cannot open a return on ebay in this case.

Location: Southcentral Outboards, Altamont, Illinois

We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help!