- Brand: Mercury
- Size: 65 HP
- Color: Silver
- Style: 3 Cylinder
- Condition: Seller Refurbished
- Notes: Rebuilt & Engine Ready!
- SKU: 11280 CRB-R
- Manufacturer Part Number: 5228A5
- Country of Manufacture: United States
- Motor & Engine Type: Mercury
- Part Type: Motors, Engines & Components
- Other Part Number: WMK-13
- Surface Finish: Vapor Blasted
- Inventory Number: 11280 CRB-R
- Website Category: Fuel and Oil Systems
- Website Sub Category: Complete Carburetors
- UPC: N/A
| Part Number | 5228A5 (Top & Bottom) WMK-13-1 - Top WMK-13-3 - Bottom |
| Additional Info | As seen in the pictures, the coupling linkage pieces will need to be replaced. The carburetor you are purchasing will be remanufactured and ready for installation on your engine. It will come with new gaskets, usually a Sierra kit when available, and a new needle (seats as well, with the exception of Mercury) and any other parts as necessary. THE FIRST PICTURE YOU SEE IN THE LISTING IS NOT GENERALLY THE CARBURETOR YOU WILL BE RECEIVING. THE INITIAL PICTURE IS A SAMPLE OF HOW THE CARBURETOR WILL LOOK WHEN IT IS SENT TO YOU. PLEASE REFER TO THE ADDITIONAL PICTURES AS THE ACTUAL CARBURETOR SET! Our goal is for you to receive this in ready to use condition. We adjust needles to factory specs, which sometimes means you may have to make minor adjustments on your engine. The bowl will be left off of the carburetor when it is sent, in order for you to inspect it and make sure that the needle is seating after shipping. We can provide assistance with these minor adjustments if you need help. Please note that none of our carburetors will have hoses with them. WE BUY CORES! Send in a rebuildable core the same size and we will pay 25% for this core. Please contact us ahead of time and we will provide a return label if you are sending in your core. For smaller HP cores, we will pay 20%. If you send in a core that cannot be rebuilt, we will contact you to offer you an option to send it back but we will not buy a damaged carburetor. Please note that this carburetor set is missing the screw plugs, and the brass fittings in the bowl. This should be able to be removed from your old carburetor set.We offer a 45-day return policy so you can purchase this item with confidence. If you have any issues with the product, please reach out to us and we would be happy to help resolve any issue that may occur. Please be absolutely sure this is the correct one for your motor prior to purchasing. If you purchase this item incorrectly or change your mind, we will accept a return within 45 days however, we will charge our initial shipping cost and a 20% restocking fee. If you have any questions, please contact us. Location: Southcentral Outboards, Altamont, Illinois |
| Fits: | 1973-1975 - 65 HP We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help! |
